With the help of advancements in thermal imaging technology, there are many electrical products available in the market. The people in Wollongong are hiring the electrical technicians in order to install or to solve the problem that occurs in the electrical products. Some of the electrical faults need maintenance, while some technical electrical problems need replacements.
The residents and commercial buildings in Wollongong are available with the different types of electrical products. You have to approach the electrical technician to find the solution. The technicians are using the thermal imaging technique to figure out and solve the electrical problems. Let’s see how these thermal imaging Wollongong are used to figure out and provide the solution for the electrical problems.
To use the thermal imaging technique, a qualified electrical technician is needed. The technician will point the thermal imager to the faulted equipment and scan the area and search for the unexpected hot spots. The Thermal imager can produce the live image of the heat emitted from the equipment. If it is finding any quick squeeze of the trigger, the thermal image will capture it. And once the inspection is completed, the technician can upload the images to a desktop, or iPhone for closer analysis, reporting, and future trending.
The images obtained from thermal imaging are easy to use and effective information will be available in the hands of the qualified technician. The following are some of the faults that can easily figure out with the help of Thermal imaging Wollongong.
- Faulty terminal wires
- Damaged Jumper wires
- Faulty disconnects
- Loose or over tightened wire connections
- Faulty motor bearings
- Breaker problems
- Broken or undersized wires
- Faulty insulations and overheating fuse clips
- Fuses over their current capacity
An electrical error, which can be detected with the help of thermal imaging Wollongong, is a three-phase imbalance. The thermal imager will capture the images of all electrical panels and other high load connections such as drivers, disconnects, controls, etc. Wherever the technicians are discovering the higher temperatures, they will follow that circuit and examine the associated branches and loads.
The technicians will compare all three phases side by side and check the temperature difference. Generally, more heavily loaded phases are always having a warmer temperature. The hot conductors may be undersized or overloaded. The thermal imaging techniques will produce similar patterns for the unbalanced load, overload, and a bad connection. The electrical technicians will follow up on the electrical or power quality measurements to diagnose the problem.
Connections and wiring
The thermal imaging Wollongong can be used to look for the faults in the connections and wiring. With thermal imaging, the technicians will come to know about the loose, over tightened, corroded connection with increased resistance. The connection-related hot spots will not always have the warmest temperature at the spot of resistance. The thermal imaging can also find out the cold component faults, which are abnormal due to the current being shunted away from the high resistance connection. It is able to find out the broken or undersized or defective insulation wires.
Whenever the fuses show up hot on the thermal imaging scanning process, it may be at or near to its current carrying capacity. However, not all fuses defectives are at a hot temperature. Instead, the blown fuse would produce a cooler temperature than the normal fuse temperature.
Motor control centers
To find out the faults in MCC with thermal imaging, you have to open up each compartment and compare the relative temperature of key components like bus bars, controllers, starters, contactors, relays, fuses, breakers, disconnects, feeders, and transformers. The thermal imaging technique will incorporate the inspecting connections, fuses, and identifying the phase imbalance in Motor control centers. If you want to evaluate the accurate fault, it is recommended to load at the time of each scan.
Is it possible to find out the electrical faults in the transformer? Of course Yes! You are able to find out the faults of the transformers with the help of Thermal imaging. With the help of this technique, technicians are able to look at high and low voltage external bushing connections, cooling tubes, cooling fans, and pumps as well as the coil temperatures.
By now, you get information about the thermal imaging techniques, and how these techniques are used to figure out the faults in the electrical products. Find out the best electrical repairing service provider, who is available with thermal imaging and figure out the electrical faults easily and quickly.